650J Aerogel Insulation Material Apply In Air Conditioner System Duct Coated

Aerogels Flexible Thermal Insulation Aerogel 650J

Product Introduction

Commercial products for the building sector include:

§ Cavity insulation.

§ Glazing units and cladding systems containing granular aerogel.

§ Translucent and opaque insulation boards, blankets and tensile roof membranes embedded with aerogel particles.

Transparent monolithic silica aerogel has been cited as the ‘holy grail’ of future glazingtechnology, with the potential to achieve U-values as low as 0.1 W/m2.K. However, researchand development into monolithic glazing is limited due to the high cost of production, long processing time and the difficulty of creating large uniform samples with complete transparency.

Excellent Performance

1. Low thermal conductivity is only 1/3 to 1/5 of traditional materials.

2. Drowning rate >99.5% moisture absorption rate <0.5%.

3. High fire rating: fire performance A1, smokeless, no droplets, no harmful gases.

4. Green environmental protection: non-toxic materials without corrosion.

5. Convenient construction: aerogels are thin, tensile and compressive. Low density and light weight. The utility knife can be cut without the need for professional tools and equipment.

6. Long service life: aerogel has a unique three-position network structure, long-term use shrinkage rate ≤1% at 650°C, and no melt sintering, powdering, aerogel is an inorganic material, UV long-term exposure is not aging, weather resistance Good service life can reach more than 20 years.

Product Specification

650J